shopping cart
+34 952 835172
Mon-Fri : 8:00 am to 5:30 pm

Gecol Tile Cement, Aggregates & Concrete

Gecol Tile Cement, Aggregates & Concrete
9 February, 2024

Gecol Tile Cement

G100 Flex is an adhesive-gel monocomponent, deformable and high performance.

Hybrid technology (resin-cement), is especially recommended for surfaces subject to important thermal variations (radiant heating systems, exterior coatings, etc.) and compromised situations (overlays, heavy traffic, etc.).Adhesive-gel, with low emissions and variable rheology, made of resin-cement base, selected natural mineral aggregates and powder-binding structural fibres,which give it qualities for its application in Multisupports, Multiformats and Multiprestations.

When drying, its nominal structure does not produce shrinkage and the tixo-fluid texture allows applications, both vertical and horizontal.

G100 Super is an adhesive-gel monocomponent, flexible, high performance.

Hybrid technology (resin-cement), is especially recommended for surfaces subject to important water variations (swimming pools, outdoor pavements, supports under immersion, etc.) and compromised situations (radiant air conditioning, supports deformable of laminated plaster, etc.).

Adhesive-gel, low emission and variable rheology, made of resin-cement base, selected natural mineral aggregates and powder-binding structural fibres, which give it qualities for application in Multisupports, Multiformats and Multiprestations.

When drying, its nominal structure does not produce shrinkage and the tixo-fluid texture allows applications, both vertical and horizontal.

Gecol Ready Mixed Renders

GECOL Revoco is a single-coat, mass-coloured covering mortar designed for the decoration, renovation and waterproofing of facades. It is suitable for new builds and the restoration of old buildings.

It can be applied to the usual brickwork surfaces (e.g. cement, ceramic brick), without the need for any previous filling with mortar. It is a mortar which is rainproof but highly permeable to the water vapour and condensation produced in building interiors. It can be used manually and by means of spraying machinery. Its compensated granulometry and the use of high-quality plasticisers mean that it extends the life of spraying machinery and all its similar components (casing, whisks, etc.)

Its use enables the appearance of the facade to be changed in a very short period of time, also offering a wide range of aesthetic options with regard to colours and textures (scraped, floated, plain, distressed, stippled and textured).

GECOL Revoco fino is a continuous, mass-coloured covering mortar designed for the decoration, renovation and waterproofing of facades. It is suitable for new builds and the renovation of old buildings. It is applied in a thin layer and thicknesses of up to 5mm, on previously levelled or filled surfaces.

It is a mortar which is rainproof but highly permeable to the water vapour and condensation produced in building interiors. It can be used manually and by means of spraying machinery.

Its compensated granulometry and the use of high-quality plasticisers mean that it extends the life of spraying machinery and all its similar components (casing, whisks, etc.)

It provides a very fine (smooth) finish and also offers different aesthetic options with regard to colours.

Gecol Ready Mixed Mortar

GECOL Sec is a high-quality cement and selected aggregates dry mortar, ready for use. It is suitable for all types of general brickwork work: masonry, assembly of cement blocks or ceramic bricks, raising, flooring, etc. As the product has been prepared and measured out in advance, there is no need to mix any cement with sand, thus avoiding any resulting errors. It is only necessary to add the right amount of water. It has high plasticity and is therefore very easy to apply and work with. It can be used in either interiors or exteriors.

It is available in different types according to the resistance and particular requirements of each building project (GM-2.5 / GM-5 / GM-7.5 / GM-10, etc.).

Gecol Ready Mixed Concrete

GECOL Hormigón seco is a conglomerate of high-resistance cement, high-quality aggregates with compensated granulometry and organic additives. It is ready for use, as it only requires mixing with water. It is suitable for carrying out filling, piping, stone wall and concrete partition works, small repairs and other non-structural applications which require high resistance. It is a product with high mechanical resistance and durability.

Gecol quality tile cements, aggregates & concrete are all avaliable from AIM British Building Supplies in Marbella (Malaga) & Javea (Alicante).